Panasonic KX-HDV330, Operating Instructions Manual

Page: 38 / 88

Call Forwarding/Do Not Disturb
You can have incoming calls automatically forwarded to another destination. You can also have incoming
calls rejected (Do Not Disturb).
To access the FWD/DND settings
[In standby mode]
1. Tap / a "FWD/DND"
2. If the unit has multiple lines, tap / to select the desired line.
3. Tap / : Select the type of FWD or DND setting to apply.
The settings are as follows:
R DND: Enable Do Not Disturb
(All incoming calls are automatically rejected.)
R Fwd(All): Enable Forward All Calls
(All incoming calls are forwarded.)
R Fwd(Busy): Enable Forward Busy
(Incoming calls are forwarded only when your extension is in use.)
R Fwd(NA): Enable Forward No answer *1
(An incoming call is forwarded if you do not answer the call within a certain amount of time.)
4. (Fwd) Tap "On/Off": Select On or Off. a "Next" or "OK"
(DND) Tap "On/Off": Select On or Off. a "OK"
5. If a Forward setting is selected, enter a new forward phone number, or confirm and modify a
previously set forward phone number. a "OK"
*1 Tap "Ring Count" to specify the number of rings before the call is forwarded.
Note
R When Call Forwarding and/or Do Not Disturb is enabled, / and/or / appears in
the status bar in standby mode.
R This feature is only available when enabled. Contact your administrator for further information.
Listening to Voice Mail Messages
When you receive a voice message, is displayed, or the Message Waiting indicator flashes slowly.
You can check your new messages by accessing your mailbox.
[In standby mode]
1. Press /[MESSAGE] or tap "Voice Message".
2. Tap / : Select the line on which is displayed.
Xsi Visual Voice Mail
With the Voice Messaging service of Broadsoft-Xsi, you can receive detailed information about
messages from the Xsi server. The following operations are available:
R Download messages
R Mark messages as read or unread
R Delete messages
For details, contact your phone system dealer/service provider.
38
Before Leaving Your Desk