Panasonic KX-HDV230XB, Operating Instructions Manual

Page: 30 / 84

Making Calls
R You can confirm that the number was dialed correctly before calling (Predialing) by entering the
number, then going off-hook.
R To clear an entire number while predialing, press
Clear
for more than 1 second.
R If an outside call is received from a phone number stored in the Phonebook, the number and name of
the caller will be displayed in the call log.
R To cancel dialing, press /[CANCEL].
R To insert a 3 second pause between phone numbers, press
Pause
*1
.
It is useful when you want to operate voice mail service without listening to pre-recorded
announcement, for example. Repeat as needed to create longer pauses.
*1 This soft key is displayed only when configured on the telephone. Contact your administrator for
further information.
Basic Calling
Calling by Dialing
1. In standby mode, go off-hook.
2. Dial the outside party’s number.
3.
Call
4. Go on-hook to end the call.
Note
R You can use a specific line by pressing a function key assigned to a line (see “Changing the Function
Keys (Program Keys and DSS Keys)”, Page 49) or by using the Line Status screen (see “Checking
the Line Status”, Page 46).
R To dial a new number without going on-hook, follow the procedure below.
1.
Menu
2. [ D ]/[ C ]: "Flash/Recall"
3.
OK
Predialing
In standby mode, you can start dialing while still on-hook. After dialing the number, go off-hook to begin
the call.
Easy Dialing
Making a call using the redial list
The last phone number dialed is stored in the redial list (32 digits max.).
[In standby mode]
1. / /[REDIAL]
2. Go off-hook.
30
Making Calls