Panasonic KX-HDV230 Page 160 Administrator'S Manual Download

Page: 160 / 342

4.7.2 Firmware Maintenance

This screen allows you to perform firmware updates automatically.

4.7.2.1 Firmware Maintenance

Enable Firmware Update

Description

Selects whether to perform firmware updates when the unit detects a
newer version of firmware.

Note

•

Manual firmware updates from the Web user interface (

see

4.7.3 Upgrade Firmware

) can be performed regardless of this

setting.

•

Firmware updates using TR-069 can be performed regardless
of this setting.

Value Range

•

Yes

•

Default Value

Yes

Configuration File Reference

FIRM_UPGRADE_ENABLE (Page 199)

Firmware File URL

Description

Specifies the URI where the firmware file is stored.

Note

•

This setting is available only when

[Enable Firmware

Update]

is set to

[Yes]

Value Range

Max. 384 characters

Default Value

Not stored.

Configuration File Reference

FIRM_FILE_PATH (Page 199)

160

Administrator Guide

Document Version 2015-07

4.7.2 Firmware Maintenance

Summary of Contents for KX-HDV230























































































































































































































































































































































Search results

Summary of Contents for KX-HDV230

Reviews:

Related manuals for KX-HDV230

Brands by name

Popular brands

Panasonic KX-HDV230, Administrator'S Manual

Search results

Summary of Contents for KX-HDV230

Reviews:

Related manuals for KX-HDV230

Brands by name

Popular brands