manualshive.com logo in svg

Panasonic KX-FT901BX, Operating Instructions Manual

Share
Download
Panasonic KX-FT901BX Operating Instructions Manual Download Page 53

10. Help

53

Troubleshooting

10.3 When a function does 
not work, check here

10.3.1 Initial settings

I cannot hear a dial tone.

L

The telephone line cord is connected to the 

[EXT]

 jack on the unit. Connect to the 

[LINE]

 

jack (page 5) (KX-FT901/KX-FT903 only).

L

If you used a splitter to connect the unit, 
remove the splitter and connect the unit to the 
wall jack directly. If the unit operates properly, 
check the splitter.

L

Disconnect the unit from the telephone line 
and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to 
have the unit repaired. If the working 
telephone does not operate properly, contact 
your telephone company.

L

The power cord or telephone line cord is not 
connected. Check the connections.

L

If you connected the fax machine through a 
computer modem, connect the fax machine 
directly to a telephone line jack.

I cannot make calls.

L

The dialling mode setting may be wrong. 
Change the setting (feature #13, page 47).

The unit does not ring.

L

The ringer volume is turned OFF. Adjust it 
(page 14).

L

The TAD ring setting of feature #06 is set to 
“

RINGER OFF

”. Change to another ring 

setting (page 47) (KX-FT907 only).

10.3.2 General

The other party complains they only hear a 
fax tone and cannot talk.

L

FAX ONLY mode is set. Tell the other party 
the number is only used for faxes.

L

Change the receiving mode:
–

KX-FT901/KX-FT903: TEL mode (page 
34) or TEL/FAX mode (page 36).

–

KX-FT907: TAD/FAX mode (page 35), 
TEL mode (page 34) or TEL/FAX mode 
(page 36).

L

If you use a Distinctive Ring service, make 
sure you have set the same ring pattern 
assigned by the telephone company (page 
38).

The 

{

REDIAL

}

/

{

PAUSE

}

 button does not 

function properly.

L

If this button is pressed during dialling, a 
pause will be inserted. If pressed 
immediately after a dial tone is obtained, the 
last number dialled will be redialled.

The receiving mode does not function 
properly.

L

A Distinctive Ring of feature #31 is activated 
(page 38).

During programming, I cannot enter the code 
or ID number.

L

All or part of the numbers are the same as 
another code or ID. Change the number:
–

remote operation ID: feature #11 on page 
47 (KX-FT907 only).

–

fax activation code: feature #41 on page 
49.

–

auto disconnection code: feature #49 on 
page 49.

The speakerphone is not working (KX-FT907 
only).

L

Use the speakerphone in a quiet room.

L

If you have difficulty hearing the other party, 
adjust the volume.

10.3.3 Fax – sending

I cannot send documents.

L

The telephone line cord is connected to the 

[EXT]

 jack on the unit. Connect to the 

[LINE]

 

jack (page 5) (KX-FT901/KX-FT903 only).

L

The other party’s fax machine is busy or has 
run out of recording paper. Try again.

L

The other party’s machine is not a fax 
machine. Check with the other party.

L

The other party’s fax machine failed to 
answer the fax automatically. Send the fax 
manually (page 27).

I cannot send a fax overseas.

L

Use the overseas transmission mode of 
feature #23 (page 48).

L

Add two pauses at the end of the telephone 
number or dial manually.

The other party complains that letters on 
their received document are distorted or not 
clear.

L

If your line has special telephone services 
such as call waiting, the service may have 
been activated during fax transmission. 

FT-901-903-907BX.book  Page 53  Monday, March 29, 2004  10:03 AM

Summary of Contents for KX-FT901BX

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands