2.4.4. SERVICE FUNCTION TABLE
Code
Function
Set Value
Effective Range
Default
Remarks
501
Setting the pause time
001~600 X 100 msec
001~600
050
Selects the pause time in 100 msec steps.
502
Setting the flash recall time 01~99 X 10 msec
01~99
70
Selects the line break time during flashing in 10
msec steps.
503
Setting the pulse dial
speed
1:10pps 2:20pps
1, 2
1
Sets the pulse dial speed.
520
Setting the CED frequency 1:2100Hz 2:1100Hz
1, 2
1
When international communications cannot be
performed smoothly select 1100Hz. However
some
exchange
system
should
not
be
accopted (1100Hz on CED). (See "5. Unit can
copy, but cannot transmit/receive long distance
or
international
communications"
in
DEFECTIVE FACSIMILE SECTION (P.36).)
521
Setting the international
line mode
1:ON 2:OFF
1, 2
1
Selects the international line mode during FAX
communication. (See "5. Unit can copy, but
cannot
transmit/receive
long
distance
or
international communications" in DEFECTIVE
FACSIMILE SECTION (P.36).)
522
Auto standby select
1:ON 2:OFF
1, 2
1
Set the resolution and contrast conditions for
FAX or copy to the default settings.
523
Receive equalizer select
1:ON 2:OFF
1,2
2
When the telephone station is far from the unit
or reception cannot be performed correctly,
adjust accordingly.
524
SND EQL.
1:ON 2:OFF
1,2
2
When the telephone station is far from the unit
or reception cannot be performed correctly,
adjust accordingly.
531
Release PIN code for DIAL
LOCK
1:ON 2:YES
1,2
1
When you want to velease the PIN code for dial
lock, press the “2” key. Then the setting value
returns to the default.
544
Selecting the document
feed position
01~99 step
00~99
50
When the ADF function is incorrect, adjust the
feed position. (8 step = 1mm)
550
Memory clear
Press "START/COPY/SET".
551
ROM version and sum check
Press "START/COPY/SET".
553
Setting the FAX monitor
function
1: OFF 2:PHASE B
3:ALL
1, 2, 3
1
Sets whether to monitor the line signal with the
unit´s speaker during FAX communication or
not.
554
Modem test
Press "START/COPY/SET".
555
Scanner test
Press "START/COPY/SET".
556
Motor test
Press "START/COPY/SET".
557
LED test
Press "START/COPY/SET".
558
LCD test
Press "START/COPY/SET".
559
Setting the document jam
detection
1:ON 2:OFF
1, 2
1
Selects the jam detection of a document during
FAX transmission/copying.
561
KEY test
Press any key.
570
Setting the % break
1:61% 2:67%
1, 2
2
Sets the % break of pulse dialing.
571
Setting the number of
times that ITS is redialed
00~99
00~99
5 times
Selects the number of times that ITS is redialed
(not including the first dial).
572
Setting the ITS redial
interval
001~999 sec
001~999
065 sec
Sets the interval of ITS redialing.
573
Setting of number of rings
for REMOTE TURN ON
01~99
01~99
10 times
Sets the number of rings before the unit starts
to receive a document in the TEL mode.
590
Setting the number of FAX
redial times
00~99
00~99
05 times
Selects the number of redial times during FAX
communication (not including the first dial).
591
Setting the FAX redial
interval
001~999 sec
001~999
065 sec
Sets the FAX redial interval during FAX
communication.
592
Designation of CNG
sending
1: OFF 2:ALL 3:AUTO
1, 2, 3
2
Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG is output only when automatic
dialing is performed. OFF: CNG is not output at
phase A.
593
Setting the interval
between CED and the 300
bps signal
1: 75 msec 2:500
msec 3:1000 msec
1, 2, 3
1
Sets the interval between the CED signal and
subsequent 300 bps signal. (See "5. Unit can
copy, but cannot transmit/receive long distance
or
international
communications"
in
DEFECTIVE FACSIMILE SECTION (P.36).)
594
Setting the overseas DIS
detection
1: Detects on the 1st
time.2: Detects on the
2nd time.
1, 2
1
Sets the recognition format of the DIS signal.
1:Detects the first DIS signal sent from the
receiver during FAX transmission. 2:Ignores
the first DIS signal sent from the receiver during
FAX transmission. (See "5. Unit can copy, but
cannot
transmit/receive
long
distance
or
international communications" in DEFECTIVE
FACSIMILE SECTION (P.36).)
77
KX-FT72BR-G
Summary of Contents for KX-FT72BR-G
