Panasonic KX-FT25LA, Service Manual

Page: 54 / 167

Code Function Set Value Default Remote setting
598 Receiving Sensitivity 20~48 40 OK
717 Transmit speed select 1:9600/2:7200/3:4800/4:2400bps 9600bps OK
718 Receive speed select 1:9600/2:7200/3:4800/4:2400bps 9600bps OK
719 Ringer off in TEL/FAX mode 1:ON/2:OFF ON OK
721 Pause tone detect 1:ON/2:OFF ON OK
722 Redial tone detect 1:ON/2:OFF ON OK
731 CPC mode 1:A / 2:B / 3:OFF A OK
763 Friendly reception CNG detection select 1:10S/2:20S/3:30S 20S OK
771 T1 timer 1:35 sec/2:60 sec 35 sec OK
774 T4 timer 00~99 X 100ms 00 OK
775 Monitoring of message transfer 1:ON/2:OFF OFF OK
815 Sensor check Press "START". --------- NG
841 Digital SP-Phone RX & TX check 1: SP-Phone --------- NG
882 Journal 3 1: START --------- NG
991 Transmit basic list 1: START --------- OK
992 Transmit advanced list 1: START --------- OK
994 Transmit journal report 1: START --------- OK
999 Transmit service list 1: START --------- OK
OK : Can set the value by the remote programming feature or print a list.
NG : Cannot set the value.
Note:
Note: Refer to 2.4.4. SERVICE FUNCTION TABLE for descriptions of the individual codes.
For example, the "004 Transmission report mode" set value "1:ERROR/2:ON/3:OFF" number corresponds to the number
dialled.
54
KX-FT25LA