Panasonic KX-FP80C, Service Manual

Page: 107 / 240

Code Function Set Value Effective
Range
Default Remarks
501 Pause time set X 100
msec 001~600 50 ----------
502 Flash time X 10 ms 01~99 70 ----------
503 Dial speed select 1:10 pps 2:
20 pps 1, 2 1 ----------
511 VOX sense 1:High 2:
Low 1, 2 1 When the TAM (or EXT TAM) does
stop recording the ICM because
is detected on the telephone line,
change this setting to "LOW".
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1
See Symptom/Countermeasure
for long distance and international
calls in
2.3.5.1.5. THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG
DISTANCE OR INTERNATIONL
COMMUNICATIONS
().
521 International mode select 1:ON 2:
OFF 1, 2 1
See Symptom/Countermeasure
for long distance and international
calls in
2.3.5.1.5. THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG
DISTANCE OR INTERNATIONL
COMMUNICATIONS
().
522 Auto standby select 1:ON 2:
OFF 1, 2 1 The resolution reverts to the default
when transmission is complete.
523 Receive equalizer select 1:ON 2:
OFF 1, 2 2 When the telephone station is
from the unit or reception cannot
performed correctly, adjust
accordingly.
550 Memory clear: To reset the value to the default one,
except the top margin (853) and left margin (854). "START" input
551 ROM check
See 2.5. TEST FUNCTIONS ().
552 DTMF single tone test 1:ON 2:
OFF 1, 2 2
See 2.5. TEST FUNCTIONS ().
553 Monitor on FAX
communication select 1:OFF 2:
PHASE B 3
:ALL 1~3 1 Sets whether to monitor the line
signal with the unit's speaker during
FAX communication or not.
554 Modem test
See 2.5. TEST FUNCTIONS ().
555 Scan check
See 2.5. TEST FUNCTIONS ().
556 Motor test 0
See 2.5. TEST FUNCTIONS ().
557 LED test
See 2.5. TEST FUNCTIONS ().
558 LCD test
See 2.5. TEST FUNCTIONS ().
559 Document jam detection
select 1:ON 2:
OFF 1, 2 1
See 2.2.1. DOCUMENT JAMS ()
570 BREAK % select 1:61% 2:
67% 1, 2 1 Sets the % break of pulse dialing
according PBX.
107