Panasonic KX-FP270 Operating Instructions Manual Download

Page: 113 / 144

113

Operations

For assistance, call 1-800-435-7329.

Copying

●

Pull the recording paper set lever forward, make sure the paper is
inserted correctly and push the recording paper set lever back.

●

You cannot make a copy during programming. Try to make a copy
after programming or stop the programming.

●

The glass or rollers are dirty. Clean them (p. 120).

●

The thermal head is dirty. Clean it (p. 120).

●

The film is not inserted correctly. Insert it correctly (p. 118, 119).

●

The film is not inserted correctly. Insert it correctly (p. 118, 119).

●

Some paper has instructions recommending which side to print on.
Try turning the paper over. We recommend smooth paper such as
Hammermill

Jet Print for clearer printing.

●

You may have used paper with a cotton and/or fiber content that is
over 20%, such as letterhead or resume paper. We recommend
smooth paper such as Hammermill

Jet Print for clearer printing.

●

The film is not inserted correctly. Insert it correctly (p. 118, 119).

Cause & Remedy

Problem

When you try to make a copy, the
unit beeps and the display shows
“CHECK PAPER”.

The unit does not make a copy.

A dirty pattern or a black line
appears on the copied documents.

The copied image is distorted.

The document is not copied
properly.

The copied document is blank.

The printing quality is poor.

The printing is faint.

A paper jam occurs during copying.

A B C

Original

Copy

Answering device

●

The memory is full. Erase some or all the messages (p. 94, 100).

●

Make sure that you use the remote operation ID correctly (p. 98).

Cause & Remedy

Problem

No voice messages have been
recorded in the TAD/FAX mode.

I cannot retrieve recorded messages
from a remote telephone.

Summary of Contents for KX-FP270

















































































































































Search results

Summary of Contents for KX-FP270

Reviews:

Related manuals for KX-FP270

Brands by name

Popular brands

Panasonic KX-FP270, Operating Instructions Manual

Search results

Summary of Contents for KX-FP270

Reviews:

Related manuals for KX-FP270

Brands by name

Popular brands