Panasonic KX-FP206CX Operating Instructions Manual Download

Page: 54 / 60

10. General Information

■

Voice memory capacity

(KX-FP218 only):

Approx. 18 minutes of recording time including greeting
messages

*1 Transmission speed depends on the contents of the

pages, resolution, telephone line conditions and
capability of the other party’s machine.

*2 Transmission speed is based on the ITU-T No. 1 Test

Chart with original mode. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.

*3 If an error occurs during fax reception, such as a

paper jam or if the recording paper runs out, the fax
and subsequent faxes will be retained in memory.

*4 Recording time may be reduced by the calling party’s

background noise.

Note:

The accuracy of the clock is approximately

seconds a month.

ITU-T No. 1 Test Chart

Note:

Design and specifications are subject to change
without notice.

The pictures and illustrations in these instructions
may vary slightly from the actual product.

Recording paper specifications

Recording paper size:

A4: 210 mm

297 mm

Recording paper weight:

64 g/m

to 80 g/m

Note for recording paper:

Do not use the following types of paper:
–

Paper with cotton and/or fibre content that is over
20 %, such as letterhead paper or paper used for
resumes

–

Extremely smooth or shiny paper, or paper that is
highly textured

–

Coated, damaged or wrinkled paper

–

Paper with foreign objects attached, such as tabs
or staples

–

Paper which has dust, lint or oil stains

–

Paper that will melt, vaporize, discolour, scorch or
emit dangerous fumes near 200

C, such as

vellum paper. These materials may transfer onto
the fusing roller and cause damage.

–

Moist paper

Some paper only accepts print on one side. Try using
the other side of the paper if you are not happy with
the print quality or if misfeeding occurs.

For proper paper feeding and best print quality, we
recommend using long-grained paper.

Do not use paper of different types or thickness at the
same time. This may cause paper jams.

Avoid double-sided printing.

Do not use paper printed from this unit for double-
sided printing with other copiers or printers. This may
cause paper jams.

To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.

FP206_218CX-PFQX2488ZA-en.book Page 54 Friday, August 4, 2006 4:25 PM

Summary of Contents for KX-FP206CX





























































Search results

Summary of Contents for KX-FP206CX

Reviews:

Related manuals for KX-FP206CX

Brands by name

Popular brands

Panasonic KX-FP206CX, Operating Instructions Manual

Search results

Summary of Contents for KX-FP206CX

Reviews:

Related manuals for KX-FP206CX

Brands by name

Popular brands