Panasonic KX-FP181E Operating Instructions Manual Download Page 19

Page: 19 / 94

Volumes

Adjusting volumes

Ringer volume

4 levels (high/middle/low/off) are available.
While the unit is idle, press

■

To turn the ringer off:

1. Press

repeatedly until the following

message is displayed.

Display:

2. Press .

●

To turn the ringer back on, press

■

While the ringer volume is set to off:
The display will show the following message.

When a call is received, the unit will not ring and
will display the following.

Monitor/Speaker volume

8 levels (high to low) are available.
While using the monitor/speakerphone,
press or .

Fax voice guidance volume

(KX-FP185 only)

9 levels (high to off) are available.
While listening to the fax voice guidance,
press or .

Answering device volume

(KX-FP185 only)

9 levels (high to off) are available.
While listening to the recorded messages,
press or .

INCOMING CALL

RINGER OFF

SET

YES:SET/NO:STOP

RINGER OFF= OK?

SET

Display

Summary of Contents for KX-FP181E































































































Search results

Summary of Contents for KX-FP181E

Reviews:

Related manuals for KX-FP181E

Brands by name

Popular brands

Panasonic KX-FP181E, Operating Instructions Manual

Search results

Summary of Contents for KX-FP181E

Reviews:

Related manuals for KX-FP181E

Brands by name

Popular brands