Panasonic KX-FP145 Operating Instructions Manual Download Page 68

Page: 68 / 86

9. Help

For Fax Advantage assistance, call 1-800-435-7329.

9.5 Document jams –
sending

Open the front cover by pulling up the center
part. Remove the jammed document
carefully (

Close the front cover securely.

Note:

Do not pull out the jammed paper forcibly
before opening the front cover.

Cleaning

9.6 Recording paper
feeder cleaning

Clean the recording paper feeder when:
–

The recording paper frequently misfeeds.

Important:

Remove the recording paper and the
paper tray beforehand, or the paper may
misfeed or jam.

Disconnect the power cord and the
telephone line cord.

Open the front cover by pulling up the center
part.

Release the back cover by pushing the green
button (

Open the back cover.

FP145.book Page 66 Thursday, January 15, 2004 10:46 AM

Summary of Contents for KX-FP145























































































Search results

Summary of Contents for KX-FP145

Reviews:

Related manuals for KX-FP145

Brands by name

Popular brands

Panasonic KX-FP145, Operating Instructions Manual

Search results

Summary of Contents for KX-FP145

Reviews:

Related manuals for KX-FP145

Brands by name

Popular brands