Panasonic KX-FM89BX, Service Manual

Page: 84 / 276

Code Function Set Value Default Remote
Setting
501 Pause time set 001~600 x 100msec 050 OK
502 Flash time set 01~99 x 10msec 70 OK
503 Dial speed 1:10pps / 2:20 pps 10pps OK
510 Vox time 1:8sec / 2:6sec / 3: 4sec 6sec OK
511 Vox sense 1:High / 2:Low High OK
512
Vox mode (KX-FM89CX only)
1:A / 2:B A OK
520 CED frequency select 1:2100Hz / 2:1100Hz 2100 OK
521 International mode select 1:ON / 2:OFF ON OK
522 Auto standby select 1:ON / 2:OFF ON OK
523 Receive equalizer select 1:0km / 2:1.8km / 3:3.6km / 4:
7.2km 0km OK
524 Transmission equalizer select 1:0km / 2:1.8km / 3:3.6km / 4:
7.2km 0km OK
533 Setting the number of times
that message transfer is
redialed. 00~99 03 OK
534 Setting of the message transfer/
pager call redial interval 001~999 065 OK
550 Memory clear --------- --------- NG
551 ROM check --------- --------- NG
552 DTMF signal tone test 1:ON / 2:OFF OFF OK
553 Monitor on FAX communication 1:OFF / 2:Phase B / 3:ALL OFF OK
554 Modem test --------- --------- NG
555 Scanner test --------- --------- NG
556 Motor test --------- --------- NG
557 LED test --------- --------- NG
558 LCD test --------- --------- NG
559 Document jam detection 1:ON / 2:OFF ON OK
561 Key test --------- --------- NG
570 Break % select 1:61% / 2:67% 61% OK
571 ITS auto redial time set 00~99 05 OK
572 ITS auto redial line
disconnection time set 001~999sec 065 OK
573 Remote turn-on ring number 01~99 15 OK
580 TAM continuous tone detection 1:ON / 2:OFF ON OK
590 FAX auto redial time set 00~99 05 OK
591 FAX auto redial line
disconnection time set 001~999sec 065 OK
592 CNG transmit select 1:OFF / 2:ALL / 3:AUTO ALL OK
593 Time between CED and 300 bps 1:75ms / 2:500ms / 3:1sec 75ms OK
594 Overseas DIS detection 1:1st / 2:2nd 1st OK
595 Receive error limit value 001~999 100 OK
596 Transmit level set -15~00dBm 10 OK
598 Receiving Sensitivity 20~48 40 OK
599 ECM Frame size 1:256/ 2:64 256byte OK
84