Panasonic KX-FM131AL, Service Manual

Page: 104 / 232

Code Function Set Value Effective Range Default Remarks
592 CNG transmit select 1: OFF 2:ALL
3:AUTO 1~3 2 Lets you select the CNG output
during FAX transmission. ALL:
CNG is output at phase A. AUTO:
CNG is output only when automatic
dialing is performed. OFF: CNG is
not output at phase A.
593 Time between CED and 300bps 1: 75 msec 2:500
msec 3:1 sec 1~3 1 See the Symptom/Countermeasure
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
594 Overseas DIS detection select 1:detects at the 1st
time 2:detects at the
2nd time 1, 2 1 See the Symptom/Countermeasure
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
595 Receive error limit value set X Number of times 001~999 100 Sets the number of acceptable
error lines when the FAX
reconstructs the received data.
596 Transmit level set X dBm - 15~00 11 Selects the FAX transmission level.
598 Receiving sensitivity 43= -43 dBm 20~48 43 Used when there is an error
problem. See the
Symptom/Countermeasure Table
for long distance and international
calls in 2.3.3.3.1. Defective
facsimile section.
599 ECM frame size 1:256 2:64 1, 2 1
602 Warning LIST Printing 1:ON 2:OFF 1, 2 1 Used to print a caution list when
setting the TEL/FAX mode and ring
detection.
624 AT ring time out (KX-FM131 only) 1:3sec 2:5sec 1, 2 1
717 Transmit speed selection 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 Adjusts the speed to start training
during FAX transmission.
718 Receive speed selection 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 Adjusts the speed to start training
during FAX reception.
719 Ringer off in TEL/FAX mode 1:ON 2:OFF 1, 2 1 Sets the ringer switch off when a
call is received in the TEL/FAX
mode.
721 Pause tone detect 1:ON 2:OFF 1, 2 1 Selects the tone detection for
pause in dialing.
722 Redial tone detect 1:ON 2:OFF 1, 2 1 Selects the tone detection mode
after redialing.
724 PC-FAX ATD busy tone detect (KX-
FM131 only) 1:ON 2:OFF 1, 2 1
731 CPC mode 1:A 2:B 3:OFF 1~3 1 Sets the CPC signal detection
mode from the converter
732 AUTO disconnect cancel time 1:350 ms 2:1.8 sec
3:OFF 1~3 1 "Sets to "2" when the auto
disconnect circuit operates and
cuts the line."
745 Power ON film feed 1:ON 2:OFF 1, 2 1 When the power is turned on, the
film is wound to take up any slack.
763 CNG detect time for friendly
reception 1:10 sec 2:20 sec
3:30 sec 1~3 3 Selects the CNG detection tome of
friendly reception.
771 T1 timer 1:35 sec 2:60 sec 1, 2 1 Sets a higher value when the
response from the other party
needs more time during FAX
transmission.
774 T4 timer × 100 msc 00~99 00 Use this function when delay
occurs on the line and
communication (ex. mobile comm)
does not work well.
775 Monitoring of message transfer 1:ON 2:OFF 1, 2 2 If set to ON a message can be
monitored from this unit’s SP-
PHONE when transferring a
message.
784 Voice prompt test You can hear the voice prompt
from speaker after pressing
"START" key.
815 Sensor & Vox check See 2.5. TEST FUNCTIONS.
104
KX-FP121AL / KX-FM131AL