Panasonic KX-FLM600 Operating Instructions Manual Download Page 128

Page: 128 / 156

128

Limited Warranty / Energy Star

Notes for product service and shipping
the product

For product service

≥

Servicenters are listed on page 127.

≥

Call toll free 1-800-HELP-FAX (435-7329) for the location of an authorized servicenter.

When you ship the product

≥

Carefully pack your unit, preferably in the original carton.

≥

Attach a letter, detailing the symptom or problem, to the outside of the carton.

≥

Send the unit to an authorized servicenter, prepaid and adequately insured.

≥

Do not send your unit to the Panasonic Consumer Electronics Company or to any executive or regional sales
offices. These locations do not repair consumer products.

Energy Star

As an ENERGY STAR



Partner, Panasonic has determined that this product meets the ENERGY STAR



guidelines for energy efficiency.
ENERGY STAR is a U.S. registered mark.

If this product is not used for 5 minutes, it will change to power save mode.

Summary of Contents for KX-FLM600





























































































































































Search results

Summary of Contents for KX-FLM600

Reviews:

Related manuals for KX-FLM600

Brands by name

Popular brands

Panasonic KX-FLM600, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM600

Reviews:

Related manuals for KX-FLM600

Brands by name

Popular brands