9. Programmable Features
61
Setting friendly reception
{#}{
4
}{
3
}{
8
}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{
0
}
“
OFF
”
: You have to press
{
START
}
for fax reception.
{
1
}
“
ON
”
(default): You do not have to press
{
START
}
for fax reception.
Setting the output tray to use
for faxing
{#}{
4
}{
4
}{
1
}
You can select the output tray that will be used for printing received faxes.
{
1
}
“
#1
”
: Upper output tray (Up to approx. 100 sheets)
{
2
}
“
#2
”
(default): Lower output tray (Up to approx. 50 sheets)
Note:
L
Lists or reports printed by pressing
{
HELP
}
{
MENU
}
will be stacked on the upper output tray.
Receiving a fax into the
computer
{#}{
4
}{
4
}{
2
}
If you wish to receive a fax into the computer, activate this feature and run
[
PC
FAX
]
from Multi-Function Station.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ALWAYS
”
: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{
2
}
“
CONNECTED
”
: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will print out the data.
Note:
L
The default may vary depending on feature #114 setting.
Setting the computer for PC
fax reception
{#}{
4
}{
4
}{
3
}
To select the computer that will be used for receiving a fax. See page 23 for
details.
Resetting fax features to their
default settings
{#}{
4
}{
5
}{
9
}
{
0
}
“
NO
”
(default)
{
1
}
“
YES
”
To reset the fax features:
1.
{
MENU
}
i
{#}{
4
}{
5
}{
9
}
2.
Press
{
1
}
to select
“
YES
”
.
i
{
SET
}
i
{
SET
}
i
{
MENU
}
Note:
L
The PC fax reception (feature #443 on page 23) will not be reset.
Feature/Code
Selection
FLB882CX-PFQX2773ZB-OI-en.book Page 61 Friday, October 5, 2007 11:45 AM
