3. Help
19
Detailed operating instructions are on the CD-ROM.
“
OUT OF PAPER INPUT TRAY
#1
”
L
Recording paper is not installed or the input tray has run out of paper. Install
paper.
L
Recording paper is not fed into the unit properly. Reinstall paper.
L
The paper input tray is not installed or is not inserted completely. Insert the
paper input tray into the unit.
Note:
L
“
#1
”
: Paper input tray
L
“
#2
”
: Manual input tray
“
PAPER JAMMED
”
“
OPEN TOP COVER
”
L
A recording paper jam occurred. Remove the jammed paper.
“
PC FAIL OR BUSY
”
L
The cable or the computer mains lead is not connected correctly. Check the
connections.
L
The software is not running on the computer. Restart the software and try
again.
“
PLEASE WAIT
”
L
The unit is warming up. Wait for a while.
“
POLLING ERROR
”
L
The other party’s fax machine does not offer the polling function. Check with
the other party.
“
REDIAL TIME OUT
”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
“
REMOVE DOCUMENT
”
L
The document is jammed. Remove the jammed document.
L
Attempted to send or copy a document longer than 600 mm using the auto
document feeder. Press
{
STOP
}
to remove the document. Divide the
document into two or more sheets and try again.
“
REMOVE PAPER IN INPUT
TRAY #2
”
L
The recording paper is installed in the manual input tray when trying to copy,
receive faxes or print reports. Remove the recording paper from the manual
input tray.
“
REPLACE DRUM CHANGE
SUPPLIES
”
L
The drum unit’s service life is finished. Replace the drum unit immediately.
“
RX MEMORY FULL
”
L
The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
L
If feature #442 is set to
“
ALWAYS
”
, check the connection between the
computer and the unit.
“
TONER EMPTY
”
“
CHANGE SUPPLIES
”
L
The toner’s service life is finished. Replace the toner cartridge immediately.
“
TONER LOW
”
“
CHANGE SUPPLIES
”
L
The toner’s service life is near its end. Replace the toner cartridge as soon
as possible.
“
TOP COVER OPEN
”
L
The top cover is open. Close it.
“
TRANSMIT ERROR
”
L
A transmission error occurred. Try again.
“
WARMING UP
”
L
The inside of the unit is cold. Let the unit warm up. Wait for a while.
“
WRONG PAPER
”
L
The fax message was printed on paper which is shorter than A4 size paper.
Use appropriate size paper.
Display
Cause & Solution
FLB881E-PFQW2729ZA-QRG-en.book Page 19 Wednesday, September 12, 2007 5:34 PM
