Safety Instructions
4
OTHER INFORMATION:
L
Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L
The unit should be kept free from dust, high
temperature and vibration.
L
The unit should not be exposed to direct
sunlight.
L
Do not place heavy objects on top of this unit.
L
Do not touch the plug with wet hands.
L
Wipe the outer surface of the unit with a soft
cloth. Do not use benzine, thinner, or any
abrasive powder.
CAUTION:
Laser radiation
L
The printer of this unit utilizes a laser. Use of
controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
Fuser unit
L
The fuser unit gets hot. Do not touch it.
L
During or immediately after printing, the area
near the recording paper exit (
1
) also gets
warm. This is normal.
Toner cartridge
L
Be careful of the following when you handle
the toner cartridge:
–
Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
–
If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
–
If any toner comes into contact with your
eyes, flush them thoroughly with water,
and seek medical treatment.
–
If any toner comes into contact with your
skin, wash the area thoroughly with soap
and water.
–
If you inhale any toner, move to an area
with fresh air and consult local medical
personnel.
Drum unit
L
Read the instructions on page 10 before you
begin installation of the drum unit. After you
have read them, open the drum unit
protection bag. The drum unit contains a
photosensitive drum. Exposing it to light may
damage the drum. Once you have opened
the protection bag:
–
Do not expose the drum unit to light for
more than 5 minutes.
–
Do not touch or scratch the green drum
surface.
–
Do not place the drum unit near dust or
dirt, or in a high humidity area.
–
Do not expose the drum unit to direct
sunlight.
FOR BEST PERFORMANCE:
L
In the printing process, heat is used to fuse
toner onto the page. As a result, it is normal
for the machine to produce an odor during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
L
To extend the life of the drum unit, the unit
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
L
Store unused paper in the original packaging,
in a cool and dry place. Not doing so may
affect print quality.
L
Do not cover slots or openings on the unit.
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner.
L
When replacing the toner cartridge or drum
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
Fuser unit
1
FL511C.book Page 4 Wednesday, July 9, 2003 4:45 PM