Panasonic KX-FC961CX, Operating Instructions Manual

Page: 61 / 108

8. Answering Machine
61
mode depending on the setting of feature #73
(page 66).
L
You cannot return to TAM/FAX mode in the
same call.
To turn ON the auto answer setting
1. Call your unit and wait for 20 rings.
L
A beep will sound.
2. Enter the remote operation ID (feature #11 on
page 63) within 8 seconds.
L
The auto answer setting will be turned
ON. The receiving mode will be set to
TAM/FAX or FAX ONLY mode, depending
on the setting of feature #77 (page 67).
3. Hang up the handset.
Note:
L
You cannot turn ON the auto answer setting
in the following cases:
–
when the unit is set to TEL/FAX mode.
– when the unit is set to TEL mode and
night mode (feature #35 on page 33) is
turned ON.
Recording a marker message
After playing back the messages, you can leave
an additional message.
1. Wait about 10 seconds.
2. Leave a message after the beep.
Note:
L
If you do not enter a remote command key
within 10 seconds after the last operation, the
unit will ask you to leave a marker message.
8.5 Pager call
This feature allows your unit to call your pager
when your unit receives an incoming voice
message.
1
Press
{
MENU
}
.
2
Press
{#}
, then
{
7
}{
0
}
.
3
Press
{A}
or
{B}
repeatedly to select “
ON
” .
4
Press
{
SET
}
.
5
Enter your pager number and/or pauses (up
to 46 digits).
Example:
1 202 555 1234PP12345678PP5555#
– 1 202 555 1234: Your pager number
– PP: Pauses
– 12345678: Your pager access code, if
required.
– 5555 (example): Message you want
displayed on your pager.
6
Press
{
SET
}
.
L
The unit will dial the stored number.
7
Check that your pager received the pager
test call.
8
Press
{
SP-PHONE
}
, or wait for 10 seconds.
When your pager receives a pager call
Your pager will display the message you entered
in step 5 (for example:5555).
{
SP-PHONE
}
{A}{B}
{
SET
}
{
MENU
}
FC961CX-PFQX2287ZA-en.book Page 61 Thursday, September 1, 2005 8:36 AM