• The maximum calling distance may be shortened when the repeater is used in the
following places: Near obstacles such as hills, tunnels, underground, near metal
objects such as wire fences, etc.
• Operating the repeater near electrical appliances may cause interference. Move away
from the electrical appliances.
• To prevent malfunction, deformity, overheating, rust, and discolouration, do not install or
place equipment in the following types of locations:
–Locations where air ventilation is poor.
–Locations that may be exposed to sulphurous gas, such as near hot springs.
–Near devices that emit heat, such as heaters.
–Near devices that emit electromagnetic noise, such as radios or televisions.
–Near devices that emit high-frequency noise, such as sewing machines or welders.
Routine care
•
Wipe the outer surface of the repeater with a soft moist cloth.
• Do not use benzine, thinner, or any abrasive powder.
• Disconnect the AC adaptor cord from the product before cleaning. Clean the product
with a soft, dry cloth. Do not use liquid, aerosol cleaners, abrasive powders, or
chemical agents to clean the product.
Placement
• Install the repeater within base unit range in an indoor environment. We recommend
installing the repeater in a raised position (such as on a wall).
• Avoid positioning the repeater close to objects that will interfere with reception, such as
thick walls, radiators, metal shelving, etc.
• For maximum distance noise-free operation, place the repeater away from electrical
appliances such as TV, radio, personal computer, or other telephone equipment.
• Keep an appropriate distance from the base unit to maximize the range of your phone
system.
Find the appropriate location by checking the RSSI
/ID indicator. If the RSSI/ID
indicator turns red or amber, re-position the repeater in a place where the RSSI/ID
indicator turns green.
For details about the RSSI/ID indicator, refer to "3.3 Indicators, page 18".
*1
RSSI: Received Signal Strength Indication
1.2 For best performance
8