Linking to Digital Cordless Phones (except for North
America)
This section describes how to use the repeater to connect Panasonic Digital Cordless Phone base units
and handsets.
Indicators
Indicators
Light Status
Meaning
STATUS
Green
On
R
Within base unit range. The repeater is ready for use.
Flashing
R
Handsets are communicating with the base unit
through the repeater.
Red
On
R
Out of base unit range.
Flashing
R
The repeater is not registered to the base unit.
Off
R
The power is off. (AC adaptor is not connected
properly.)
RSSI/ID
Green
On
R
Signal strength of the base unit is strong.
Amber
On
R
Signal strength of the base unit is weak.
Red
On
R
Out of base unit range.
Off
R
The repeater is not being used.
R
The power is off.
Installation/Registering the Repeater
Once the repeater is connected to an AC outlet, it automatically goes into registration mode (if not
already registered).
IMPORTANT
R
If the repeater is already registered, deregister the repeater first, then re-register it. For registering and
deregistering the repeater, refer to "Deregister" and "Re-register" in "Troubleshooting".
Note
R
Use only the supplied Panasonic AC adaptor.
R
When connecting the AC adaptor to the repeater, press the plug firmly into the repeater for secure
connection.
26
3. Linking to Digital Cordless Phones
