82
3.26 Automatic Crop
This function automatically recognizes the image size and crops it.
When it is used to scan documents of different sizes continuously, the documents are
scanned in the respective sizes and no memory is wasted.
IMPORTANT NOTES:
•
Set the reference plate and flatbed sheet to black when using the Automatic Crop
function (refer to
Changing the Reference Plate Setting
in the Operating
Instructions).
•
Depending on the images to be scanned, the function may not work satisfactorily.
•
The maximum paper size which can be cropped is the 11.7 x 17 inch.
•
If there are dark areas at the periphery of a document, these areas may be
removed as well.
•
The function may not work properly if there is any foreign matter on the reference
plate or flatbed sheet when documents are scanned by the scanner. In a case like
this, clean the reference plate or flatbed sheet.
Before Automatic Crop
After Automatic Crop
S7065C
SS905C
