Cleaning the Ion Outlets and Sensors
1.
Remove dust from the ion outlets (
A
) with a cotton swab.
•
With a thin cotton swab, remove dust from the ion outlets, and then wipe the center of the inner parts
approximately 5 times.
1
Notice
•
Do not apply too much pressure on the parts.
2.
Remove dust from the sensors (
A
,
B
,
C
,
D
,
E
,
F
) and reflectors (
G
) with a cotton swab.
Location of Sensors
1
2
2
3
4
5
6
A
Waiting sensor
B
Double feed detector
C
Slip detect sensor
D
Starting sensor
E
Paper sensor
F
Skew sensor
54
Operating Manual
Care and Maintenance
