Panasonic KV-S1065C Installation Manual Download Page 6

For Your Safety

To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.

This section explains the graphic symbols used
in this manual.

WARNING

Denotes a potential
hazard that could
result in serious
injury or death.

CAUTION

Denotes hazards
that could result in
minor injury or
damage to the unit.

These symbols are used to alert
operators to a specific operating
procedure that must not be
performed.

These symbols are used to alert
operators to a specific operating
procedure that must be
emphasized in order to operate
the unit safely.

For Users

WARNING

Power

The power source voltage of this unit is
listed on the nameplate.
Only plug the unit into an AC outlet with
the proper voltage.
If you use a cord with an unspecified
current rating, the unit or plug may emit
smoke or become hot to the touch.

When you operate this product, the power
outlet should be near the product and
easily accessible.

Connect the AC adaptor firmly to the
power cord, and plug the power cord
firmly into an AC outlet. Otherwise, it can
cause fire or electric shock.

Do not use a damaged power cord or
plug. Use of damaged components can
cause electric shock, a short, or fire.
Contact your dealer for a replacement.

Do not pull, bend, rest objects on, or chafe
the power cord, plug, and AC adaptor.
Damage to the power cord or plug can
cause fire or electric shock.

Do not attempt to repair the power cord,
plug, or AC adaptor. If the power cord or
plug is damaged or frayed, contact your
dealer for a replacement.

Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended period
of time.

Never touch the plug or AC adaptor with
wet hands.
Danger of electric shock exists.

6

Installation Manual

Before You Start

Before You Start

Summary of Contents for KV-S1065C

























Reviews: