Panasonic KMF0609058CE, Service Manual

Page: 97 / 230

97
KX-FP206CX/KX-FP218CX
12.4.2. Program Mode Table
Code Function Set Value Default Remote Set-
ting
001 Set date and time dd/mm/yy hh:mm 01/Jan/2006 NG
002 Your logo --------- None NG
003 Your FAX number --------- None NG
004 Print sending report 1:ERROR / 2:ON / 3:OFF ERROR OK
006 FAX ring count 1~9 2 OK
006 TAM/FAX ring count (KX-FP218) 2~7 / 0:TOLL SAVER 2 OK
010 Recording time (KX-FP218) 1:GREETING ONLY / 2:1MIN / 3:2MIN /
4:3MIN 3MIN OK
011 Remote TAM ID (KX-FP218) --------- ID=#11 NG
013 Dialing mode 1:PULSE / 2:TONE TONE OK
017 Ringer tone TONE 1 / TONE 2 / TONE 3 TONE 1 NG
022 Journal auto print 1:ON / 2:OFF ON OK
023 Overseas mode 1:NEXT FAX / 2:ERROR / 3:OFF ERROR OK
025 Delayed transmission ON / OFF OFF NG
026 Auto caller’s list 1:ON / 2:OFF OFF OK
031 Distinctive ring 1:OFF / 2:ON OFF OK
034 Quick scan 1:ON / 2:OFF OFF OK
036 RCV reduction 1:92% / 2:86% / 3:72% / 4:100% 92% OK
039 LCD contrast NORMAL / DARKER NORMAL NG
041 FAX activation code ON / OFF
ON ID= #9
NG
044 Memory receive alert 1:ON / 2:OFF ON OK
046 Friendly reception 1:ON / 2:OFF ON OK
047 Voice guidance (KX-FP218) 1:ON / 2:OFF ON OK
049 Auto disconnect ON / OFF
ON CODE= 0
NG
054 Greeting MSG. REC. time (KX-FP218) 1:16s / 2:60s 16s OK
058 Scan contrast 1: Normal / 2: Light / 3: Darker Normal OK
067 ICM monitor (KX-FP218) 1:ON / 2:OFF ON OK
068 ECM selection 1:ON / 2:OFF ON OK
072 Set flash mode 0: 80ms / 1:90ms / 2:100ms / 3: 110ms
4:160ms / 5:200ms / 6:250ms / 7:300ms
8: 400ms / 9: 600ms / :700ms / #:900ms
600ms OK
073 Manual answer mode 1:TEL / 2:TEL/FAX TEL OK
074 Select Location 1:AUSTRALIA / 2:NEW ZEALAND AUSTRALIA OK
076 Connecting tone 1:ON / 2:OFF ON OK
077 Auto answer mode (KX-FP218) 2: FAX Only / 3:TAM/FAX TAM/FAX OK
078 TEL/FAX delayed ring 1~9 2 OK
080 Set default YES / NO NO NG
501 Pause time set 001~600 x 100msec 030 x 100msec OK
503 Dial speed 1:10pps / 2:20 pps 10pps OK
510 Vox time (KX-FP218) 1:8sec / 2:6sec / 3:4sec 6sec OK
511 Vox sense (KX-FP218) 1:High / 2:Low High OK
514 Bell detection time 1~9
×
100msec 6
×
100msec OK
520 CED frequency select 1:2100Hz / 2:1100Hz 2100Hz OK
521 International mode select 1:ON / 2:OFF ON OK
522 Auto standby select 1:ON / 2:OFF ON OK
523 Receive equalizer select 1:0km / 2:1.8km / 3:3.6km / 4:7.2km 0km OK
524 Transmission equalizer select 1:0km / 2:1.8km / 3:3.6km / 4:7.2km 0km OK
544 Document feed position adjustment value set 1~9 5 OK
550 Memory clear --------- --------- NG
551 ROM check --------- --------- NG
552 DTMF signal tone test 1:ON / 2:OFF OFF OK
553 Monitor on FAX communication 1:OFF / 2:Phase B / 3:ALL OFF OK
554 Modem test --------- --------- NG
555 Scanner test --------- --------- NG
556 Motor test --------- --------- NG
557 LED test --------- --------- NG
558 LCD test --------- --------- NG