25
ROUTINE MAINTENANCE
Cleaning of air intake port
To open the outer door, the cap on the left side is turned counterclockwise to take the air. Therefore, the
frost is easy to be settled around the air intake port or in it. Clean the air intake port depending on the
conditions below:
Condition Remedy
When the frost and ice can
be seen in the air intake port.
Remove the frost and ice with the stick for air intake port cleaning.
The outer door cannot be
opened even if the cap on the
air intake port is removed.
Remove the frost and ice with the stick for air intake port cleaning.
The frost and ice are built in
the chamber.
Remove the frost and ice with the enclosed scraper.
CAUTION
For removing the frost in the air intake port, do not use a tool with sharp edge such as a knife or a screw
driver.
CALIBRATION
During running operation, the following service works must be performed;
･
Perform temperature calibration at least once a year.
Contact our sales representative or agent.
Stick for air intake port cleaning (Accessory)
