background image

Schedules

36

6

Enter the event number (00 to 07), then press 

[

*

]

. Refer to the Event Table on page 37 for 

available events.
When selecting event number “01”, enter the 
output number, then press 

[

*

]

.

When selecting event number “02”, enter the 
access group number, then press 

[

*

]

.

When selecting event number “03” to “07”, 
enter the partition number, then press 

[

*

]

.

0=arm all,

1=partition 1, 

2=partition 2,

3=arm common

Enter the start time and days of week, then 
press 

[

*

]

.

Hour= 00-12, minute= 00-59, AM= 0, 
PM= 1
Days=move the cursor under the desired 
days by pressing 

[

*

]

, then press “1” to 

select the day. (SMTWTFS indicates days 
of week.)

Enter the event’s stop time, AM/PM and days 
of week, then press 

[

*

]

.

Enter the repeat option, then press 

[

*

]

.

0= no repeat
1=repeated weekly
2=repeated every other week
3=repeated every third week
4=repeated every fourth week

Enter the randomize option if desired, then 
press 

[

*

]

 to save the setting.

0= No, 1= Yes
If you select “1”, the schedule time will 
change within 60 minutes of the “hour” 
time.
Ex. If you set to start at 6:15pm, it will start 
first to start at 6:15pm. On the following 
days it will start anytime between 6:00 an 
6:59pm.

• To move the cursor to the right, press 

[

*

]

.

To move the cursor to the left, press 

[

#

]

.

• If you entered the wrong number, the cursor does 

not move to the next item. 

10 Enter Event

Forced Away   05

Example

10 Partition

               0

START    SMTWTFS

12:00AM  1000000

Example

SecurityPhone.book  36 ページ  2004年7月21日 水曜日 午後6時58分

Summary of Contents for K10059

























































Reviews: