3
2
Device Installation
Important
•
Make sure that the installation area is strong enough to hold the product, such as a
concrete ceiling.
•
Install the camera in the foundation area of the architecture or where sufficient strength
is assured.
•
If a wall or ceiling board such as plasterboard is too weak to support the total weight,
the area shall be sufficiently reinforced.
Please see Figure 3-1 and Figure 3-2.
Step 1
Open accessories bag, take out installation position map and stick it to designated surface where
you will install the device (wall or ceiling).
Step 2
Dig a hole according to position of hole on installation position map.
Step 3
Remove the installation template label and attach the camera with 3 screws (locally procured).
Step 4
Plug external wiring of the device properly.
Figure 2-1
