How to care
<How to clean up the thermal head and the rubber roller. >
Push the paper cover lever to open the paper cover.
Wipe off any dust/dirt using the cotton swab with a small amount of alcohol (ethanol).
(Do not use thinner, benzene series or kerosene series.)
Close the cover after alcohol volatilizes.
Rubber roller
Thermal
head
How to attach the Option parts
<How to attach the Belt hook. >
1) Please put the belt hook on the back of the printer confirming the attaching direction.
2) Please attach the belt hook to the printer with two screws of the attachment so as not to
loosen.
<NOTE>
Do not pull the belt hook strongly.
Failure to observe this may cause breaking and dropping the printer.
Do not use any other screws except the specified screws of the attachment.
13
