7
●
When using in hot or cold environment, some peripherals may fail to work prop-
erly. Check the operation environment of the peripherals.
Notes on Use and Maintenance
Obey the following points to ensure proper use of the unit.
Operating Environment
• If the tablet computer you are using with this unit is wet due to rain, for example, wipe off the
moisture before docking the computer in the unit.
• Place the unit on a flat, level surface.
• Do not place the unit in locations subject to direct sunlight or near heating appliances.
• Do not place the unit in locations subject to extreme temperature fluctuations or high temperatures.
• The charging times for tablet computers and battery packs will vary depending on the operating
environment.
• Charge tablet computers and battery packs in an ambient temperature range of 10 °C to 35 °C (50 °F
to 95 °F).
• The supplied AC adaptor is required to operate the unit.
Do not use AC adaptors other than the one included.
• Do not place the unit on its sides or upside down.
• Do not block the ventilation slits.
Drop Impacts and Damage
• The unit is a delicate apparatus. Be sure to handle it with care.
• Do not subject the unit to impacts or dropping.
AC Adaptor
• Moving the unit from a cold environment to a warm one may result in condensation.
If condensation occurs, avoid using the unit until the condensed moisture has evaporated.
• Do not subject the AC adaptor to impacts or dropping, or place objects on the AC adaptor.
• If the AC adaptor is dirty, wipe it with a soft, dry cloth. (Never use thinner or other volatile substances.)
• Do not leave the AC adaptor in locations where it will be subject to sunlight for prolonged periods
or to excessively high or low temperatures.
• Do not use the AC adaptor outdoors.
• Do not use the power cord supplied with the AC adaptor with other AC adaptors.
• Do not use power cords other than the one supplied with the AC adaptor.
Cleaning
• Always disconnect the AC adaptor before performing cleaning.
• If the unit is dirty, wipe it with a soft, dry cloth.
• Do not use thinner, benzine, wax, petroleum-based liquids, soap, powder cleansers, hot water,
chemical cleaning cloths, etc.
• If dust or oil has accumulated on the power feed / communication connector, battery pack charging
may not be possible. Use a soft, dry cloth to wipe off.
• Be careful not to bend the power feed / communication connector.
Miscellaneous
• Do not dock battery packs other than the JT-B1-BT000U battery pack in the battery pack charging slot.
• Do not touch the power feed / communication connector.
• Do not drop coins, clips, or other metallic objects into the battery pack charging slot.
JT-B1-CU000UJ_Cradle_EGFJ.indb 7
2013/08/07 12:14:42
