Commissioning and configuration
ISE SMART CONNECT KNX Panasonic
1-000C-000
© 2019 ise Individuelle Software und Elektronik GmbH
S. 28 / 69
8.2 Configuration
The device is configured in the ETS (Engineering Tool Software). The ETS is available with various rang
-
es of functions from the KNX Association (www.knx.org).
All descriptions in this documentation relating to configuration in the ETS refer to the variant "ETS Pro
-
fessional" in the version 5.
Work steps
1.
Create ISE SMART CONNECT KNX Panasonic as device in the ETS
2.
In the ETS, assign the device and its physical address corresponding to the KNX topology.
3.
Select the option <<Receive IP address automatically>> or select <<Use a permanent IP address>>
and complete the following fields: IP address, IP subnet mask and standard gateway address,
see Setting the IP address, IP subnet mask and standard gateway address, p. 31.
4.
Set the general parameters,
►
see Configuring Parameters, p. 38.
5.
Link the group addresses to the communication objects.
6.
ISE SMART CONNECT KNX Panasonic is now ready for commissioning via <<Program ETS>> and
for testing the functions.
Help on the ETS is available in the integrated ETS Online Help.
• Press the [F1] button.
