How to Clean the Refrigerator
Once every 3 months
Tray
Removing
1
Lift up the back of the tray and pull it
forward. Once the protrusions of the
tray are unhooked from the rails, tilt the
tray and remove it.
Attaching
2
Push the tray until it reaches the end
lock.
Remark
●
For easier to take the glass trays out from the refrigerator, please remove door shelves and
bottle shelves first.
●
The Glass tray vegetable case is cleaned by directly cleaning inside the refrigerator. (Due
to its fixed design.)
●
In case of attaching the tray and it does not lock, make sure that you did not attach it into it
the wrong tray.
●
Trays are made of glass and heavy.
Please handle them with care so that they do not fall and cause any damage or injury.
For attaching trays, hold them with the protrusion side down and firmly insert.
Once every 3 months
Vegetable case / Freezer cases
※
Vegetable case
Removing
1
Fully open both doors of the Fridge room
2
Remove Large door shelves
4
(According to Parts identification in Page
12, 13 before removing the Vegetable
case.)
3
Pull the case forward until it reaches the
end and gently lift the front of the case to
remove it completely.
Attaching
1
Insert the case into the shelf.
2
Gently lift the case and push forward
until it reaches the end.
3
Install Large door shelves
4
into the
doors.
※
Freezer cases
Skip the steps of removing and installing the Large door shelves
4
. Remove and install
Freezer cases in steps same as Vegetable case.
28