PAN9028 Wi-Fi/Bluetooth Module
5 Full Usage
Quick Start Guide Rev. 1.0
Page 24 of 34
5.4 Configuring Wi-Fi
1. Navigate in the task bar to the Indicator section and click on the icon
(1) to open the
Network Manager Applet.
2. Select an appropriate entry in the list of Wi-Fi networks to establish a connection (2).
➔
The result of any network operation will be shown in a pop-up message in the
upper right corner.
When the Wi-Fi settings are manipulated both through the web interface and
the Network Manager applet, the state displayed on either side may be
incorrect.
It may be necessary to reload the page on the web.
5.5 Accessing Network
The following requirement must be met:
✓
Wi-Fi is configured
After a connection to a network has been established, any network application may be used.
