background image

8

Auto back focus (ABF) function 

SP306

Auto Back Focus (ABF) ensures easy installation and stable focus in both color and black & white 
modes.

Focus assist (F. A.) function 

SP305

SP302

During the manual focus adjustment, this function indicates the best focus position.

Color mode / black & white mode switching available 

SP306

Images will be displayed clearly even at night since the camera will be automatically switched from 
the color mode to the black and white mode under low illumination condition.

Important:

  •  The operating sound might be heard during the mode change, however it does not indicate 

any malfunction.

Power over Ethernet function

When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply con-
necting a LAN cable. (IEEE802.3af compliant) 

Interactive communication with audio

By using the audio output connector and the microphone in connector, receiving audio from the 
camera on a PC and transmitting audio from the PC to the camera is available.

SDHC/SD memory card slot equipped

It is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually at 
an alarm occurrence or on a web browser.
It is also possible to save JPEG images at a network failure occurrence. (Download is possible.)
* Recommended SDHC/SD memory card (

 page 34)

     

About the user manuals

There are 2 sets of operating instructions for the WV-SP306, WV-SP305, WV-SP302 (NTSC model), 
WV-SP306E, WV-SP305E, WV-SP302E (PAL model) as follows.
  •  Installation Guide: Explains how to install and connect devices.
  •  Operating  Instructions  (PDF):  Explains  how  to  perform  the  settings  and  how  to  operate  this 

camera.

Adobe

®

 Reader

®

 is required to read these operating instructions (PDF) on the provided CD-ROM.

When the Adobe

®

 Reader

®

 is not installed on the PC, download the latest Adobe

®

 Reader

®

 from 

the Adobe web site and install it.
"WV-SP306,  WV-SP305,  WV-SP302"  or  "SP306,  SP305,  SP302"  shown  in  the  instructions  and 
illustrations  used  in  these  operating  instructions  indicate  the  WV-SP306,  WV-SP305,  WV-SP302, 
WV-SP306E, WV-SP305E, WV-SP302E.
The screens used in these operating instructions show the case of NTSC model.

     

Summary of Contents for i-Pro WV-SP306





































Reviews: