Authorisation Code for a Tenant
13
An Authorisation code can be assigned for each carrier and each tenant.
®
10.6 [8-5] Carrier—Authorisation Code for Tenant
Authorisation Code for a Trunk Group
14
An Authorisation code can be assigned for each trunk group and each carrier.
®
10.8 [8-7] Authorisation Code for TRG
Itemised Billing Code
15
An Itemised Billing code can be assigned for each extension and for each verification code.
If a call is not made from an extension (e.g., DISA or TIE) and no verification code is used, the Itemised
Billing code assigned in the location 1 of the verification code will be used.
®
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
®
6.10 [4-2-1] Portable Station—Extension Settings—Option 1—
®
Conditions
CAUTION
The software contained in the ARS feature to allow user access to the network must be upgraded to
recognise newly established network area codes and exchange codes as they are placed into service.
Failure to upgrade the on-premise PBXs or peripheral equipment to recognise the new codes as they are
established will restrict the customer and users of the PBX from gaining access to the network and to these
codes.
KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.
•
Dialled Number on SMDR
It is possible to choose to print either the user-dialled number or the modified number on SMDR through
system programming. (
®
1.26.1 Station Message Detail Recording (SMDR))
®
13.1 [11-1] Main—SMDR Options—
•
ARS Data Download/Upload
It is possible to download or upload the following ARS data to the PBX using PC programming:
–
2
ARS Leading Number Exception Table
–
3
ARS Leading Number Table
–
4
ARS Routing Plan Table
®
®
This is useful when a carrier has changed the call charge, and the updated data can be used for multiple
customers.
•
A TRS/Barring check is done before ARS is applied. (
®
1.9.1 Toll Restriction (TRS)/Call Barring
PC Programming Manual References
→ARS - Leading Digit
→ARS - Except Code
→ARS - Routing Plan
2.5.10 Tool—Export
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.17 [2-9] System Options—Option 3—
150
Feature Guide
1.10.1 Automatic Route Selection (ARS)
Summary of Contents for HYBRID IP-PBX KX-TDA200
