Panasonic HYBRID IP-PBX KX-TDA100, Pc Programming Manual

Page: 737 / 854

2.15 [8] ARS
PC Programming Manual 737
2.15.2 [8-2] Leading Number
Specifies the area codes and/or telephone numbers as leading numbers that will be routed by the
ARS feature. A maximum of 1000 different leading numbers can be programmed, and each leading
number can select a Routing Plan Table number, which determines the ARS procedure.
The additional (remaining) number of digits can also be specified for each leading number. The
additional (remaining) number of digits must be specified only when "#", for example, is needed after
the dialled number. The "#" will be added after the programmed number of digits of the user-dialled
number (excluding the leading number).
100 leading numbers are displayed at a time. To display other sets of leading numbers, click the
applicable tab.
Leading Number
Specifies the leading number.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and X)
Maintenance Console Location
2.15.2 [8-2] Leading Number
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
Additional Number of Digits
Specifies the additional (remaining) number of digits following each leading number.
Value Range
0–15
Maintenance Console Location
2.15.2 [8-2] Leading Number
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
Routing Plan Number
Specifies the Routing Plan Table number used for each leading number.