manualshive.com logo in svg

Panasonic HYBRID IP-PBX KX-TDA100, Pc Programming Manual, Page: 508 / 854

Share
Download
Panasonic HYBRID IP-PBX KX-TDA100 Pc Programming Manual Download Page 508

2.10 [3] Group

508

PC Programming Manual

2.10.16 [3-5-3] Incoming Call Distribution Group—Miscellaneous

Optional settings related to Incoming Call Distribution Groups can be programmed.

Options—Call Log to ICD Group for Answered Call

Selects whether answered calls to an ICD Group are also logged in the Incoming Call Log for the 
group, in addition to the log of the extension that answered the call.

Value Range

Disable, Enable

Maintenance Console Location

2.10.16 [3-5-3] Incoming Call Distribution Group—Miscellaneous

Programming Manual References

None

Feature Guide References

1.2.2.1 Incoming Call Distribution Group Features—SUMMARY

Options—ICD Group Key Mode

Selects whether ICD Group buttons at extensions operate as normal or in Enhanced Phantom button 
mode.
When set to Enhanced Phantom mode, creating an ICD Group button at an extension using PT 
personal programming automatically registers the extension as a member of the relevant ICD Group. 
The extension user can also specify the delayed ringing settings.

Value Range

Group DN, Enhanced Phantom

Maintenance Console Location

2.10.16 [3-5-3] Incoming Call Distribution Group—Miscellaneous

Programming Manual References

2.10.14 [3-5-1] Incoming Call Distribution Group—Member List—Delayed Ring

Feature Guide References

1.2.2.1 Incoming Call Distribution Group Features—SUMMARY

Options—Longest Idle Distribution (Optional SD Card Required)

Selects whether incoming calls are distributed to idle extensions evenly in order (UCD), or to the 
extension that has been idle the longest (ACD).

Value Range

Disable (UCD), Enable (ACD)

Summary of Contents for HYBRID IP-PBX KX-TDA100























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments