Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 35 / 364

1.3 C
Feature Manual 35
• When Caller ID information such as "Private", "Out of Area", or "Long Distance" is received, this
information will be shown instead of the caller's number and name.
• Even if the caller's name is sent, the name may not be shown depending on the type of SLT.
• Incoming Call Log information is not shown on the SLT.
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Miscellaneous
→
Caller ID—Waiting to receive
→
Caller ID—Visual Caller ID Display
2.8.17 [2-9] System Options—Option 4—Private Network—Public Call through Private Network—Minimum
Public Caller ID Digits
2.8.18 [2-10] Extension CID Settings
2.9.1 [3-1-1] Trunk Group—TRG Settings—Main—Caller-ID Modification Table
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 7
→
Extension Caller ID
→
Incoming Call Wait Timer for Extension Caller ID
2.12.1 [6-1] System Speed Dial
2.12.2 [6-2] Caller ID Modification
PT Programming Manual
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[490] Caller ID Signal Type
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
1.16.3 Speed Dialing, Personal
1.16.4 Speed Dialing, System
1.3.2 Call Hold
Description
An extension user can put a call on hold. The following Hold features are available:
The result of the holding operation can be determined through system programming. Pressing the HOLD
button again just after the first time alternates the mode between General and Exclusive Call Hold.
Feature Description
Call Hold General Any extension can retrieve a held call.
Exclusive Call Hold Only the extension user who held the call can retrieve it.