Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 286 / 364

1.16 S
286 Feature Manual
Operating Manual References
1.3.60 Speed Dialing, Personal
1.4.1 Call Log, Incoming
1.4.3 Directories
3.1.2 Personal Programming
3.3 System Programming
1.16.4 Speed Dialing, System
Description
An extension user can make calls using abbreviated dialing for frequently dialed numbers which are stored
in the PBX as System Speed Dialing numbers.
Conditions
• Any number, such as a telephone number or feature number, can be stored in Speed Dialing. A name
can be assigned to each Personal Speed Dialing number through personal programming, and also to
each System Speed Dialing number.
• Call Directory—Speed Dialing
Display proprietary telephone (PT) users can make a call by selecting a stored name shown on the
display.
• TRS Override by System Speed Dialing
It is possible to override Toll Restriction (TRS) when dialing a number using System Speed Dialing. (
→
1.17.6 TRS (Toll Restriction))
• System Speed Dialing Display by AUTO DIAL/STORE Button
Pressing the AUTO DIAL/STORE button on a display DPT or KX-T7735 while on-hook can display the
System Speed Dialing Directory.
• When an EMEC or MEC card is installed in the PBX, System Speed Dialing numbers can be assigned
separately for each tenant, depending on the PBX used:
– KX-TDA50: Each tenant can select to use either the original set of common System Speed Dialing
numbers or the additional common set.
– KX-TDA100/KX-TDA200/KX-TDA600: Each tenant can select to use either the original set of
common System Speed Dialing numbers or the set of System Speed Dialing numbers designated
specifically for that tenant.
Installation Manual References
KX-TDA50
2.5.6 MEC Card (KX-TDA5105)
KX-TDA100/KX-TDA200
2.3.2 MEC Card (KX-TDA0105)
KX-TDA600
2.3.2 EMEC Card (KX-TDA6105)
Programming References
PC Programming Manual