Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 335 / 364

1.20 W
Feature Manual 335
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Extension PIN
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 2—Extension PIN
PT Programming Manual
[005] Extension Personal Identification Number (PIN)
Feature Manual References
1.3.19 COS (Class of Service)
1.4.7 DISA (Direct Inward System Access)
Operating Manual References
1.3.72 Walking COS
1.20.2 Walking Extension
Description
It is possible for an extension user to trade extension settings with another extension.
When Walking Extension is executed, all extension settings (extension number, Class of Service (COS),
One-touch Dialing memory, etc.) of the "old" extension are exchanged with the "new" extension.
This feature is useful when an extension user moves desks, or when an extension user has no permanent
desk.
This feature is also known as Walking Station.
Conditions
[General]
• This feature allows extension settings to be switched between PT and PT, SLT and SLT, or PT and
SLT. Moving between tenants is also possible.
• Incoming calls to your extension will reach you at your new location.
• An extension personal identification number (PIN) is required to use this feature. (
→
1.5.6 Extension
PIN (Personal Identification Number))
• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after the
Walking Extension has been performed, the new extension number of the PT must be assigned as the
paired extension through system programming.
• If the Walking Extension feature is performed at the same time that the target extension is being
programmed by PC, the Walking Extension feature may not work properly. (
→
1.13.6 PC Programming)
[MPR Software File Version 3.1000 or later]
• This feature also allows extension settings to be switched between IP-PT and IP-PT, IP-PT and PT, or
IP-PT and SLT.
Programming References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—Walking Extension