Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 100 / 364

1.5 E
100 Feature Manual
• The length of time that a relay is turned on can be specified separately for each relay through system
programming.
• If the same or another extension tries to access an external relay that has already been switched on,
the timer for that relay is reset.
Installation Manual References
KX-TDA50
2.5.1 DPH4 Card (KX-TDA5161)
2.8.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA100/KX-TDA200
2.6.1 OPB3 Card (KX-TDA0190)
2.6.3 EIO4 Card (KX-TDA0164)
2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA600
2.8.1 OPB3 Card (KX-TDA0190)
2.8.3 EIO4 Card (KX-TDA0164)
2.11.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
Programming References
PC Programming Manual
2.7.29 [1-1] Slot—DPH Card Property (KX-TDA50 only)—For Output (EIO)—Device Type
2.8.8 [2-6-1] Numbering Plan—Main—Features—External Relay Access
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—External Relay Access
2.11.6 [5-4] External Relay
PT Programming Manual
None
Feature Manual References
1.3.19 COS (Class of Service)
Operating Manual References
1.3.27 External Relay
1.5.9 External Sensor
Description
External sensing devices, such as security alarms or smoke detectors, can be connected to the PBX. When
the PBX receives input from a sensor, a call is made to the preset destination, alerting the extension user.
The available destinations of a sensor call are as follows:
[Available Destinations]