- 158 -
∫
Using Direct Mode
The files can be transferred directly from the Eye-Fi card to a smartphone
or tablet without going through the access point when necessary setting
is performed in a PC in advance.
≥
Install the software supplied with the Eye-Fi card on your PC, and
configure the Direct Mode settings.
≥
Insert the Eye-Fi card.
Select the menu.
≥
An SSID and password are displayed. Confirm the displayed content,
and press the SET button.
≥
If any of the following operations are performed, the Direct Mode will
be cancelled.
j
If you turn the unit off
j
Closing the LCD monitor, sending the unit into Standby Mode.
j
Starting motion picture or audio recording
The Direct Mode may be cancelled by the Eye-Fi card for reasons
other than the above.
≥
In Direct Mode, the Economy Mode function (
) is disabled.
≥
When [TRANSFER] (
) is set to [OFF], [START DIRECT MODE]
cannot be selected.
≥
The Eye-Fi transfer feature cannot be guaranteed to continue to
operate in the future due to changes to the card specification etc.
≥
Update the firmware of the Eye-Fi card to the latest one using the
software supplied with the Eye-Fi card before use.
≥
During an Eye-Fi transfer, the Economy Mode function (
) is
disabled.
≥
When the endless memory function of the Eye-Fi card is set to on, the
files transferred from the card may be deleted automatically.
≥
The Eye-Fi card may heat up as a result of the files being transferred.
≥
When the Eye-Fi card is used, the battery will run down faster.
≥
Audio files cannot be handled.
[MENU]:
#
[Eye-Fi]
#
[START DIRECT MODE]
2