Panasonic HX-DC2, Owner'S Manual

Page: 125 / 224

VQT4F46
125
2 Select the menu.
3 Specify the starting position for the
scene.
≥
Play back to near the position where you
wish the scene to start, then pause
playback and specify the starting position
precisely using frame-by-frame playback.
The pause position will be the starting position of the scene.
≥
If you wish the split scene to start from the beginning of the scene, go
to Step 4.
Operations
4 Tilt the SET button up.
5 Specify the end position for the scene.
≥
The screen for specifying the end position of the scene appears.
≥
Set the end position by performing the same operations as when
setting the start position.
≥
The portions displayed in green are saved.
≥
If you wish to splice a preceding section to
a subsequent section, tilt the SET button
down. Each downward tilt of the SET
button changes the section to be deleted.
6 Press the button or the
recording start/stop button.
[MENU]:
#
[EDIT VIDEO]
#
[ (SPLIT)]
Play back With the unit paused, tilt the SET button to the
right for approximately 2 seconds to play back
normally, and to the left to play back in the
reverse direction.
Pause During playback, press the SET button.
Fast forward/
rewind During playback, you can change the playback
speed by tilting the SET button right or left.
Frame-by-frame With the unit paused, tilt the SET button to the
right to advance frame-by-frame, and to the left
to reverse frame-by-frame.
2
HX-WA20PPPCPU-VQT4F46_mst.book 125 ページ ２０１２年２月１４日 火曜日 午後５時１０分