- 22 -
You can attach this unit to a Multi Mount or Tripod Mount and perform recording.
Using a Multi Mount
Attach the Multi Mount to a smooth surface, such as a helmet.
≥
Before attaching the Multi Mount, remove the hook and loop fastener
and the band from the Multi Mount.
1
Peel off one side of the double sided tape, and attach it
to the smoother side of the fastener that has a harder
texture (hook fastener).
2
Peel off the other side of the double sided tape, and
attach the hook fastener to a location where the Multi
Mount will be attached to.
≥
Dust, etc. adhering to the contact surface will weaken the adhesion.
Before attaching the double sided tape, remove the dust, etc., and
wipe with a dry cloth.
≥
The double sided tape is not peelable. Taking account of the height,
width, etc. of the Multi Mount attached to this unit, attach the tape to a location where it will not
come in contact with a helmet shield, etc.
3
Pass the fastener that has a softer texture (loop
fastener) through the Multi Mount so that the soft
fabric side will face down.
Attaching this unit to a Multi Mount or
Tripod Mount
≥
When the Tripod Mount is attached to a tripod or similar item, do not hold this unit or adjustment
belt to carry the assembled items.
≥
It may not be possible to attach a Multi Mount to a helmet or other object, depending on its shape.
≥
When the adjustment belt becomes too loose to hold this unit in position, stop the use of the
Multi Mount or Tripod Mount.
≥
Do not touch the lens while attaching or removing parts.
≥
Do not hold this unit or adjustment belt to carry the assembled items.
Attaching to a helmet, etc.
Note the following points so that the Multi Mount will achieve an optimal adhesion strength:
≥
Avoid high or low temperatures and high humidity, and do the attachment work indoors.
≥
Attach the Multi Mount at least 24 hours before use. (Adhesion is optimized after a period of at
least 24 hours in the environment above.)
