![background image](http://html2.mh-extra.com/html/panasonic/hx-a1m/hx-a1m_basic-operating-instructions-manual_3416105031.webp)
31
(ENG) SQT0886
When disposing of the used product, initialise the network settings and erase all data on this unit.
≥
Disassemble after the battery runs out.
≥
If it cannot be removed smoothly, contact Panasonic’s Service Centre.
≥
Keep disassembled parts out of reach of children.
1
Remove the terminal cover and
glasscover. (
l
7)
2
Remove the three screws shown in
the figure below, and remove the
cover
A
.
≥
Before removing the screws, peel off the label
on the terminal with a sharp object.
≥
Use a cross-slot screwdriver (commercially
available).
3
Pull out the inner unit.
4
Remove the five screws shown in
the figure below, and remove the
frame
B
.
5
Remove the lead
C
from the
holders
D
.
6
Open the control board
E
, and lift
up the battery.
7
Pull out the battery connector
F
upwards, and remove the battery.
Regarding the handling of used batteries
≥
Insulate the terminals with cellophane tape or
similar.
≥
Do not disassemble.
How to remove the battery
This figure describes the disposal of this unit, it is not instruction for repair. If
disassembled, repair is not possible.
HX-A1M-SQT0886_mst.book 31 ページ 2015年4月6日 月曜日 午前9時46分