Panasonic HomeHawk KX-HNC505, User Manual

Page: 34 / 200

Registering front door cameras and outdoor cameras
1
From the [HomeHawk] app home screen, tap
®
[Add Camera(s)] .
2
Tap [OUTDOOR Camera] or [FRONT DOOR Camera] .
3
If you are close to the access point and can press its SETUP button:
Press and hold the access point’s SETUP button until the access point’s LED indicator blinks slowly
in green, and then tap [Tap here to continue] .
If you are not close to the access point and cannot press its SETUP button:
Tap [Tap here if AccessPoint isn’t close] .
R If there are multiple access points, select the access point that you want to register the device to.
4
Tap [Next] and follow the on-screen instructions.
5
When prompted, press and hold the SETUP button on the camera that you want to register until the
camera’s LED indicator blinks slowly in green.
R Follow the on-screen instructions.
R When registration is complete, the camera sounds one long beep.
R If registration fails, the camera sounds several short beeps.
Note:
R You can customize the name of each device for easier management. For details, see “Changing the
name of cameras”, Page 140.
Registering HD cameras
1
From the [HomeHawk] app home screen, tap
®
[Add Camera(s)] .
2
Tap [Indoor HD Camera] .
3
For iPhone or iPad:
Continue from step 5 of “Initial setup for iPhone, iPad”, Page 149.
For Android devices:
Continue from step 5 of “Initial setup for Android devices”, Page 150.
Mobile device features
Mobile device features (overview)
You can configure settings for your mobile device.
Editing mobile device names
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Mobile Device Settings] .
3
Tap [Name] and enter the desired name.
4
Tap [OK] .
34
Getting started with the HomeHawk!