Compact Laser Displacement Sensor
HL-G1
SERIES
5
The
GT02
/
GT12
series HMI can be used in
combination with the
HL-G1
to allow easy confirmation
of sensor status and configuration of sensor settings
from a remote location. Japanese, English, Chinese, and
Korean are supported. For more information about the
GT02
/
GT12
series, visit
our website.
HMI screen (Free download available)
Meas
– 7 . 8 2 5 7
Hold
Timing
Zero set Reset
Top
mm
LSR
AL
OUT1
OUT3
OUT2
Meas
–7. 8257
Hold
Timing
Zero set Reset
Top
mm
LSR
AL
OUT1
OUT3
OUT2
Select from the following HMI
operator panels:
Power supply: 24 V
Communication port: RS-422 / RS-485
●
AIG02GQ14D
●
AIG02MQ15D
●
AIG12GQ14D
/
AIG12GQ15D
●
AIG12MQ14D
/
AIG12MQ15D
Software tool for sensor configuration and evaluation (Free download available)
In addition to configuring up to 16 sensors at once,
this free tool makes it easy to gather data needed for
analysis, such as received light waveform monitoring
and data buffering. The interface language can be
selected at the time of installation.
●
Data buffering
Stores and displays measurement data, which can be
superimposed on previously recorded data for easy
comparison and analysis.
●
Received light waveform display
Displays the amount of light received by cell from light-
receiving element.
●
Measured value display
Displays measured values as well as the output state
for each terminal.
HIGH FUNCTION TYPE
(
HL-G1□-S-J / HL-G1□-RS-J
)
The integrated communications interface lets the sensor communicate with upstream
devices such as PLCs.
Sensors and other devices can be connected in a 1:1
manner using RS-422, or up to 16
HL-G1
series sensors
can be connected using RS-485, enabling them to return
measured values in response to messages from the PLC.
When using one of our PLCs*, you can use the PLC’s data
write / read instructions (F145 and F146) to easily configure
HL-G1
series settings and acquire measurement output.
* Supported PLCs from Panasonic Industr
y
:
FP0R
,
FPΣ
,
FP-X
PLC
High-function type
HL-G1□-S-J
HL-G1□-RS-J
Software tool and HMI screen data support not only
Japanese and English, but also Chinese and Korean,
providing a new level of support for devices and
equipment in use worldwide.
Multilingualization
GLOBAL SUPPORT
Terms of use
Panasonic Industr
y
offers no warranty for this software and is not liable
for any loss or damage suffered as a result of its use or operation,
whether direct, indirect, incidental, consequential, or unforeseen.
Software is available for download.
Sensor configuration and evaluation software tool, HMI screen data, function blocks, etc.
