1
INSTRUCTION MANUAL
Micro Laser Distance Sensor for IO-Link (CMOS)
ME-HGC1000LV1EN 09/2018
Thank you very much for purchasing Panasonic products. Please read this
Instruction Manual carefully and thoroughly for the correct and optimum
use of this product. Kindly keep this manual in a convenient place for quick
reference.
WARNING
●
This product is intended to detect objects. Do not use it to carry out
safety control functions to prevent accidents.
●
Never use this product as a sensing device for personnel protection.
●
Do not look into the beam directly during operation.
1
CE marking
This product complies with the following standards and
regulations.
●
For the EU: EMC Directive 2014/30/EC
Contact for CE:
Panasonic Marketing Europe GmbH
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, Germany
2
Confirmation of packed content
●
Sensor
1pc.
●
Laser warning label (JIS Standards, GB Standard)
1 set each
● FDA certification label
1pc.
●
Instruction Manual (Japanese, English)
1pc. per
language
3
Safe use of laser product
In order to prevent accidents caused by laser products and to protect the
users, IEC, JIS and FDA established the following standards:
IEC:
IEC 60825-1-2014 (EN 60825-1-2014)
JIS:
JIS C 6802-2014
FDA:
PART 1040 (Performance standards for light-emitting products)
These standards classify laser products according to their level of hazard
and provide safety measures for the respective classes.
Warning label and position
LASER RADIATION
LASER APERTURE
CLASS2 LASER PRODUCT
(IEC60825-1 2007)
(MAXIMUM OUTPUT) 1mW
(PULSE DURATION) 5ms max.
(WAVELENGTH) 655nm
DO NOT STARE
INTO BEAM
An English warning label is attached to this product.
4
Part description
5
6
7
8
9
1
2
3
4
No.
Item
1
Zero set indicator (Yellow)
Lights when the zero set function is
enabled.
2
Teaching indicator (Yellow). Lights when teaching is in process
3
Output operation indicator
(Orange)
Lights when the output is on
4
Laser emission indicator
(Green)
Lights when the laser beam is ON
5
TEACH key
6
UP key
7
DOWN key
8
Digital indicator (Red)
9
PRO indicator (Yellow)
Lights in Pro mode
Flashes in normal status during IO-Link
communication
OFF in normal status without IO-Link
communication
5
Mounting
●
When mounting this product, use M3 screws (prepare separately).
Use a tightening torque of 0.5 N m for mounting.
●
When mounting this product using the sensor mounting bracket (op-
tional), also use a tightening torque of 0.5N·m
37m
m
18mm
M3 screws
Mounting hole dimensions
If the fixed ring loosens, the connector will come off, causing this product to gen
-
erate a communication error. Before use, check that the fixed ring is not loose
.
●
Firmly tighten the fixed ring by rotating it.
Fixed ring
Mounting direction
● When performing measurements of moving objects with excessively
different materials and colors, mount the product in the following direc
-
tions to minimize measurement errors.
●
When performing measurements of rotating objects, mount the prod-
uct as follows. The effect of up/down deflection and position deviation
can be minimized by mounting the sensor in the correct direction.
HG-C1000L
Series
