14
VQT2U80 (ENG)
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
≥
Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
1
Connect the AC cable to the AC adaptor and the AC outlet.
2
Connect the DC cable to the AC adaptor.
3
Connect the DC cable to the DC input terminal [DC IN].
≥
When removing the AC adaptor, be sure to hold down the power button until the status
indicator goes off. Then remove the AC adaptor.
Connecting to the AC outlet
DC IN
A
DC output terminal
B
DC input terminal
Insert the DC cable matching the
[
] mark of the DC input
terminal.
HDC-SD600EP-VQT2U80_mst.book 14 ページ ２０１０年４月１２日 月曜日 午後２時３２分
