S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Main P.C.B. ........................................................................... S-2
S2.2. Sub P.C.B. ............................................................................. S-2
S3. Block Diagram .......................................................................... S-3
S3.1. System Control Block Diagram ............................................. S-3
S3.2. Video/Audio Signal Process Block Diagram ......................... S-4
S3.2.1. Video/Audio Signal Process Block Diagram (1) ................. S-4
S3.2.2. Video/Audio Signal Process Block Diagram (2) ................. S-5
S3.3. Camera Block Diagram ......................................................... S-6
S3.4. Lens Drive Block Diagram..................................................... S-7
S3.5. Power Block Diagram............................................................ S-8
S4. Schematic Diagram .................................................................. S-9
S4.1. Interconnection Diagram ....................................................... S-9
S4.2. Main CN Schematic Diagram .............................................. S-10
S4.3. Video Schematic Diagram ................................................... S-14
S4.4. Process Schematic Diagram ............................................... S-18
S4.5. Sensor Schematic Diagram ................................................ S-22
S4.6. Lens Drive Schematic Diagram........................................... S-26
S4.7. AVIO Schematic Diagram .................................................... S-30
S4.8. Syscon Schematic Diagram ................................................ S-32
S4.9. V DAC Schematic Diagram ................................................. S-36
S4.10. HDMI Schematic Diagram................................................. S-37
S4.11. USB Host Schematic Diagram .......................................... S-38
S4.12. G Sensor Schematic Diagram........................................... S-39
S4.13. Power B Schematic Diagram ............................................ S-40
S4.14. Power A Schematic Diagram............................................. S-42
S4.15. Sub CN Schematic Diagram ............................................. S-46
S4.16. RTC Schematic Diagram .................................................. S-50
S4.17. SD Holder Schematic Diagram ........................................ S-51
S5. Print Circuit Board .................................................................. S-52
S5.1. Main P.C.B. ......................................................................... S-52
S5.1.1. Main P.C.B. (Component Side) ........................................ S-52
S5.1.2. Main P.C.B. (Foil Side) ..................................................... S-56
S5.1.3. Main P.C.B. Address Information ..................................... S-60
S5.2. Sub P.C.B. ........................................................................... S-62
S5.2.1. Sub P.C.B. (Component Side) .......................................... S-62
S5.2.2. Sub P.C.B. (Foil Side) ...................................................... S-63
S5.2.3. Sub P.C.B. Address Information ....................................... S-64
S6. Replacement Parts List .......................................................... S-65
Table of contents
Service Manual
VM0808038CE
Diagrams and Replacement
Parts List
Vol. 2
(K)...........Black Type
Colour
Model No.
HDC-SD100P
HDC-SD100PC
HDC-SD100PL
HDC-SD100E
HDC-SD100EB
HDC-SD100EE
HDC-SD100EF
HDC-SD100EG
HDC-SD100EP
HDC-SD100GC
HDC-SD100GK
HDC-SD100GN
HDC-SD100GT
HDC-SD100SG
High Definition Video Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
