69
How to use the user data
The contents of the setting menus can be saved in the
user area of the camera’s memory, and they can be
loaded from this area. Use of this data speeds up the
process of reproducing suitable setup statuses.
User data operation
Menus are used to save the setting menu contents in
the user area of the camera’s memory and load them
from this area.
Saving the user data
Loading the user data
1
Perform the menu operations (pages 86 to 88),
and display the “INITIALIZE” screen of FILM
(CAM) MAIN MENU 4.
2
Turn the JOG dial button to move the arrow
(cursor) to the WRITE USER DATA item.
4
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The data settings are saved in the user area of the
camera’s memory.
5
After the data has been saved, press the MENU
button twice.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
1
Perform the menu operations (pages 86 to 88),
and display the “CAM CARD READ/WRITE”
screen of FILM (CAM) MAIN MENU 3.
2
Turn the JOG dial button to move the arrow
(cursor) to the READ USER DATA item.
4
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The data settings saved in the user area of the
camera’s memory are loaded, and the settings are
completed.
5
Press the MENU button twice.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
n
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
n
READ USER DATA
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
n
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
TITLE1:
TITLE2:
TITLE3:
TITLE4:
3
When the JOG dial button is pressed, the following
message appears.
READ ?
YES
n
NO
3
When the JOG dial button is pressed, the following
message appears.
WRITE ?
YES
n
NO
6
When the frame frequency setting has been
changed, it is necessary to restart the unit by
turning the POWER switch to OFF and then to ON
again for the setting to be switched.
02. 英(P26-88) 05.5.18 10:42 ページ69
